The Simucube Ultimate was designed with "only the best is good enough" mindset.
This is our tribute to the Ultimate drivers, suitable for the highest level of motorsport training applications for pro drivers and teams alike.
According to our internal testing, this is a very special Force Feedback wheel base providing absolutely unprecedented performance.
Abundant 32 Nm of torque and maxed-out torque response rate is at your disposal at anytime. Ultimate is based on Austrian made maximally dynamic industrial motor optimized for simulation.
It's equipped with a 24 bit resolution Hiperface angle sensor to be fully utilized
by the most advanced signal processing unit seen in simulators.
The sensor has Hiperface interface with resolution of 16 Million counts per revolution. The output of the Hiperface sensor is sampled at constant 20 kHz sample rate.
The ultimate is hand built and each of one them are individually tested and calibrated at Granite Devices in Finnland for multi torque cogging + ripple (certificate included) and comes with 5 years of warranty.
Ultimate exclusively comes with advanced fine tunable signal processing to make the experience as personalized as humanly possible.
The new dual CPU 216 MHz processor features superscalar ARM architecture, making it effectively four times faster than the 72 MHz processor of IONI drive in Simucube 1.
Simucube 2 power MOSFETs are rated over 2X their actual need to make them virtually immortal.
Included with SC2 Ultimate wheel base:
- Power supply
- All required cables
- Premium Standard Torque Off Button
- Fixings for wheelbase
- Pin for Simucube quick release
- Simucube Quick Release Side Parts
Technical specifications and features:
Simucube Wireless Wheel™ support
Simucube Quick Release™
Torque reconstruction processing: Yes
Static force reduction: Yes
Natural damping, inertia and friction filters: Yes
Ultra low latency mode: Yes
Adjustable torque slew rate limit: Yes
Non-linear force saturation: Yes
Super Fine tuning filters: Yes
Isolated surge protected USB port: Yes
Max torque 32 Nm
Max torque slew rate 9.5 Nm/ms
Angle sensor resolution 24 bit
Torque Off button Premium
Power supply 1000 W
Physical size 115 x 115 x 310 mm
Fixing holes 9mm dia x 4 pcs. through hole
Screw bolt pattern dia 130 mm
Flange centering hole dia 110 mm
Warranty period: 60 Months
| Brand | Simucube |
|---|---|
| Colour | No |
| Weight | 18.800000 |